Carbon steel procurement route
Start with strength and standard, then lock the delivery form
Select the design standard and exact grade before dimensions, rolling condition, impact temperature, processing, inspection, quantity, and destination. Similar strength values do not make grades interchangeable.
Produk
Products in this family
Pilih baja karbon dalam plate, coil, pipe, dan profil struktural bersama Tsingshan Steel (Shandong) dengan mengonfirmasi grade, toleransi, finishing, berat lot, dan pelabuhan tujuan sebelum penawaran. Kami koordinasikan MTC, inspeksi SGS / BV / Intertek, dan kemasan ekspor untuk mengurangi risiko spek dan pengapalan.
Quick filters
Common grades
Common standards
Recommended for RFQ
Commercially important products with complete specifications and RFQ guidance.
Quick quote details
Confirm these points before inquiry so the quotation can be practical and specific.
- Konfirmasi grade, standar, ketebalan atau diameter, kuantitas, dan pelabuhan tujuan.
- Minta MTC EN 10204 3.1, foto loading, dan inspeksi SGS / BV jika proyek mensyaratkan.
- Tinjau kemasan laut, proteksi anti-korosi, dan mark lot sebelum pengapalan.
- Selaraskan jendela pengiriman dan dokumen ekspor dengan jadwal proyek.
Menampilkan 14 dari 14 produk
Product family comparison
Compare approved Baja karbon specifications
This table uses technically approved specification records only. An empty cell means no public value has been approved yet.
| Product | Grade | Standard |
|---|---|---|
| Plate baja karbon A36View product | A36 | ASTM A36/A36M |
| ST37 baja karbon coilView product | No approved public value | No approved public value |
| Plate baja karbon S355View product | No approved public value | No approved public value |
| A283 baja karbon plateView product | No approved public value | No approved public value |
| ST12 cold-rolled baja sheetView product | No approved public value | No approved public value |
| AH36 baja karbon plateView product | No approved public value | No approved public value |
| NM500 baja karbon plateView product | No approved public value | No approved public value |
| S275JR baja karbon plateView product | No approved public value | No approved public value |
| 1020 baja karbon coilView product | No approved public value | No approved public value |
| SS400 baja karbon coilView product | No approved public value | No approved public value |
| S235JR baja karbon coilView product | No approved public value | No approved public value |
| A36 baja karbon coilView product | No approved public value | No approved public value |
Grades, standards, applications
Grades, standards, applications
Common grades
Lock acceptance standard with the grade name (ASTM vs EN vs GB/JIS).
- Structural Carbon Steel
- Alloy Steel
- Flat Carbon Steel
Common standards
- ASTM A36
- ASTM A36M
- EN 10025-2 (PROJECT EQUIVALENT)
- EN 10204
- DIN ST37 PRACTICE
- EN 10025-2 (S235 CLASS WHEN AGREED)
- EN 10025-2
- PROJECT ASTM HIGH-STRENGTH EQUIVALENT ONLY WHEN AGREED
- ASTM A283
- ASME SA283
- GB/T 700
- ASTM A131
Typical applications
- Konstruksi dan infrastruktur
- Manufaktur industri
- Service center dan distributor
- Proyek dengan dokumentasi ekspor
Size & dimension range
- Plate thickness about 1.5–200 mm; coil/strip width up to ~2,000 mm.
- Sections by standard designation or drawing size.
- State cutting needs, tolerance class, and packing method.
- Note UT or third-party inspection if required.
Category FAQ
Category FAQ
Data apa yang dibutuhkan untuk penawaran baja karbon dalam plate, coil, pipe, dan profil struktural?
Kirim grade, standar, ukuran, toleransi, kuantitas, pelabuhan tujuan, dan syarat sertifikat atau inspeksi.
Apakah dokumen impor disiapkan?
Ya. Kami koordinasikan MTC, packing list, invoice, foto loading, dan dukungan inspeksi SGS / BV / Intertek sesuai pesanan.
Product center
Switch to Other Steel Families
Navigate to other metallurgical groups for cross-reference pre-qualification.
Minta penawaran teknis
Choose Baja karbon for your application
Send the grade, dimensions, quantity and destination port. We will match the product and prepare a specific quotation.